How To Waterproof Your Electric Skateboard? 5 Easy Steps

 

Looking to enjoy your electric skateboard for many years to come? One of the best ways to extend the lifespan of any electronic device is by waterproofing it. Waterproofing your electric skateboard is not only a great way to protect your investment, but it will also help keep you safe while riding. Wet conditions can be dangerous; even a small amount of water can damage sensitive electronic components.

This DIY guide will easily show you how to waterproof your electric skateboard in five simple steps. By the end, you’ll have a board ready to take on any weather conditions.

Waterproof Vs. Water-Resistant Electric Skateboard

The terms waterproof and water-resistant are often used interchangeably, but there is a big difference between the two. Water-resistant electric skateboards are designed to prevent sensitive areas like ESC compartments and batteries from coming into contact with water. You can ride them in light rain or on slightly wet surfaces without damaging the board.

On the other hand, waterproof electric skateboards are completely impervious to water. You can ride them through puddles and shallow water without damaging the board. One thing that both waterproof and water-resistant electric skateboards have in common is the hub motor. The hub motor is located between the hub of the wheels and is sealed with a rubber seal to prevent water from damaging it. They also have a water-resistant ESC (Electronic Speed Controller) inside the battery compartment.

Materials Required To Waterproof Your E-board

Several materials will be required to waterproof your electric skateboard. These include:

• Heat Shrink Wrap
• Thicker Shrink Plastic
• Grip Tape
• Spray Paint
• Waterproof Sealant

While some of these materials may cost a little bit of money, they are essential to waterproofing your board and keeping it in good condition. Quality is important regarding waterproofing, so use high-quality materials that won’t damage your board.

Steps To Waterproof Your Electric Skateboard

Now that you have all of the materials needed, it’s time to start waterproofing your electric skateboard. Follow these five simple steps, and you’ll have a board ready to take on any weather conditions.

1. Wrap The Battery

Start by individually wrapping your board’s battery in a heat shrink sheet. Make sure you wrap it tightly, leaving no space for water to get in touch with the battery. It’ll help if you use a heat gun to shrink the wrap tightly around the battery.

2. Cover The Deck

Once you’ve wrapped the battery, cover the whole deck of your electric skateboard upside down with a thicker shrink plastic sheet. Again, ensure that you tighten the sheet as much as possible, leaving no space for water to get in touch with the board or its battery. The deck is the most vulnerable part of an electric skateboard to water damage, so it’s important to ensure it’s well-protected.

3. Tape The Edges

For extra coverage, tape the edges of your electric skateboard with grip tape. This will make it even more water-resistant and reliable. Also, if you’re planning on riding your electric skateboard in the rain, the grip tape will help you keep your footing.

4. Coat The Board With Spray Paint

Then, coat the whole board with black metallic spray paint. This water-resistant paint will double-maintain your board from rain and drops. It’ll also give it a nice, slick look.

5. Ride Safely!

Now you’re ready to enjoy your electric skateboard in any weather conditions. Just be sure to ride safely and wear proper protective gear when skating. Also, keep an eye on your battery life and charge it regularly.

FAQs about waterproofing electric skateboards

 

1. Why Is Waterproofing  Essential For electric Skateboards?

To avoid short circuits that may cause fires, it is essential to waterproof your skateboard. Waterproofing your skateboard will protect the battery, motors, and other electrical components from water damage. Also, if you live in an area with a lot of rain or snow, waterproofing your skateboard will help to keep it in good condition and prevent rusting.

2. Is It Difficult To Waterproof A Electric Skateboard?

No, it is not difficult to waterproof a skateboard. It is a relatively easy process that only takes a few minutes. Follow the above steps, and you will have a waterproof skateboard.

3. What Components Need To Be Waterproofed o an electric skateboard

?

The battery, motors, and other electrical components need to be waterproofed. They are the most vulnerable to water damage and should be protected. Also, it is a good idea to waterproof the deck and trucks as well.

Final thoughts

Following the above steps should ensure that your electric skateboard is properly waterproofed and protected against the elements. Taking the time to do this will prolong the life of your board and save you money in the long run. Don’t let a little water ruin your fun – make sure your board is ready to go, no matter the conditions.

Happy skating!